Nissan OEM (NLA) Fender Extension, LH, (used) Fits all 70-78 Da
Used, best quality left rear bumper end for 77-78 280Z coupe, pn 85351-n4700
Note: We also have reusable, but lower quality bumper ends in inventory. If you can not afford our best used condition bumper ends, please inquire about others that could meet your needs and budget.
Minimum to small abrasions are typical of exterior condition, but these units will have no deep cuts, chips or common tears in lower accordion section making them a best choice for a repair or restoration project.
Backside metal anchors will typically have rusty areas, but will be solid and firmly anchored in rubber.
Bumper ends of this quality have an above average preserved rubber finish that will polish up to a beautiful, glossy luster with either plastic polish or a soft buffing wheel.
Caution: Buffing wheels create heat on plastic surfaces which can burn through factory finish which, in most cases, can not be polished out afterwards. Unless well experienced with polishing plastics, it is advised that only hand applied plastic polish be used to restore much of the factory gloss inherent in these best preserved 40 year old bumper ends.
Polishing Service Note: We offer a pre shipment polishing service of bumper ends for an extra charge. If interested, please call us to have us send you a custom invoice with this service added to total.
| Weight | 4 lbs |
|---|---|
| Dimensions | 20 x 6 x 6 in |
Only logged in customers who have purchased this product may leave a review.
Nissan OEM (NLA) Fender Extension, LH, (used) Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models) Best quality, used condition with only some minor light surface rust on backside area that will clean up easily prior to paint. All threaded studs and threads in undamaged condition. No dents or bondo. We also have lower priced, but quite decent and usable used condition variations of this part in stock. Call us direct to inquire about one of these to fit your budget. Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headligh
Fuel Filler Tube Fits: 74.5 260Z coupe, 75-76 280Z coupe Excellent used condition. Ends are not age hardened. Cleaned up, inspected and ready to install on a high quality Datsun Z car Sold as shown in photo. Used upper rubber body seal, upper mount collar and metal upper piece sold separately. Current pn -17208-N4500 (pn cast into tube is 17229-N4500) Note: Nissan lists a different parts number for 2+2 model filler hose, but we have salvaged many tubes from 2+2 models that have above coupe pn 17229-N4500 cast into filler hose. If you need a filler hose for 2+2 model pl
77-78 Datsun 280Z / 280Z 2+2 OEM, NOS black wiper set with new rubber blades. The perfect, original OEM finishing touch on a prized daily driver 77-78 year 280Z or restoration.
Water heater hose for Datsun 280Z Excellent used condition water heater hose for 75-78 Datsun 280Z models. No cracks in end rubber indicates that this hose was virtually new with very little in service tine before being removed from wrecked car. Good deal if you've been looking for this critical NLA part for long. Superseded Nissan pn: B7182-N4220
Reviews
There are no reviews yet.