SOLD Vintage 14x6 Shelby Cal 500 slot wheels
4x4.5 bolt pattern.
Sold as a complete set of 4. To arrange a purchase, send a request via our "Parts Inquiry form" with your complete name, ship to address and phone #. We will email or call you with complete purchase information and a shipping quote.
2 wheels in set have been previously polished. 3 & 4 have not. Overall, set is in good, used condition
4 tab aftermarket center caps sold separate from wheels. 2 caps are like new, 3rd is bright & clean. The 4th shows more weathered age, but could clean up to acceptable match
Vintage, used 14×6 Shelby Cal 500 slot wheels, set of 4
9mm rods for "Stroker Motor" build
Much sought after and hard to find, used set of 6 special 9mm connecting rods most often used to build a Nissan L28 "Stroker Motor". Most Nissan factory installed connecting rods were "8mm" as opposed to "9mm" rods used only in a small number of 240Z L24 engines.
Used set of hard to find, L24 engine, 9mm connecting rods most often used to build Nissan L28 “Stroker Motors”.
Used, semi-restored 72-23 240Z OEM steering wheel
Excellent used condition with no scratches or blemishes in "wood grain" like grip. Wheel is in process of being completely restored.
Pictured in this AD, at price shown, aluminum metal spokes and inner hub have been bead blasted clean ready for a 2 stage primer & paint.
As steps in restoration progress, price will increase to reflect time and labor expended.
Once totally restored, price will be $495.00
To request current stage of restoration and price email Eric at email@example.com. Please refer to steering wheel with SKU
Semi-restored 240Z OEM steering wheel. Wheel is in process of being completely restored. Read description for future price change.
L6 engine support insulator
New, NOS RH/LH Front engine support insulator for 70-78 240Z, 260Z, 280Z and 79-83 280ZX. May also be correct for any other Datsun models of that era that came with L4? & L6 engines installed, such as Datsun 810, Maxima. Send us measurements of insulator you are replacing and we'll compare it to this NOS unit or check interchange for other classic Datsun models at carpartsmanual.com
New, NOS RH/LH Front engine support insulator for 70-78 240Z, 260Z, 280Z and 79-83 280ZX
240Z, 260Z, 280Z door window glass
For coupe models to 7/75, RH (pn 80311-E4101)
Final price on any window glass will be determined by used condition selected or requests for custom search for specific condition criteria plus special handling/packaging fee required to ship glass safely. For a price quote or to purchase, please contact us direct via phone or our Parts Request Form on this site.
RH (80311-E4101) door window glass for coupe models up to production date 7/75
New NOS 260Z / 280Z Wiper Arm LH
for S30 models with production date range 08/73-07/76
ASSY-ARM NO.1 LH
2 SEATER 2+2 SEAT ER
Note: We also have a good supply of quality used condition wiper arms for both sides and all years from 1970-1986 Z cars at lower prices. Please contact us direct for a quote
NOS unit has SOLD
Used units are available to purchase. Send us a request to purchase at firstname.lastname@example.org
Datsun Z Car Model & Production Date Interchange
Nissan OEM (NLA) Fender Extension, LH, (used)
Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models)
Best quality, used condition with only some minor light surface rust on backside area that will clean up easily prior to paint. All threaded studs and threads in undamaged condition. No dents or bondo.
We also have lower priced, but quite decent and usable used condition variations of this part in stock. Call us direct to inquire about one of these to fit your budget.
Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headligh
Best quality, USED condition 240Z, 260Z, 280Z headlight bucket with only minor light surface rust on backside area
Weber/Redline Dual DGV Carburetor setups for L6 engines
This specific DGV setup has sold. We have several more partially complete, 2 carb setups for sale at reduced prices.
All setups have complete carburetor bodies and manifold adapters for Z car side mounting, but accessories like throttle rod and linkage arms may be missing. These misc pieces can still be purchased from Weber/Redline.
If interested please call us direct with your project needs and we will check our stock to determine whether we can help or not.
NOTE: Due to weight and size purchase of a DGV setup must be in
(SOLD) excellent used condition Weber Dual DGV downdraft carburetor setup for L6 engine Z cars.