
Used 77-78 280Z coupe Fuel tank filler tube. Cleaned up, inspected and ready to install
Used Fuel tank filler tube Fits: Datsun 1977-1978 280Z coupe
Used 77-78 280Z coupe Fuel tank filler tube. Cleaned up, inspected and ready to install
Used Fuel tank filler tube Fits: Datsun 1977-1978 280Z coupe
Used Fuel tank filler tube Fits: Datsun 1977-1978 280Z coupe models Excellent used condition. Not age hardened. Cleaned up, inspected and ready to install on a high quality Datsun Z car Price Note: Tube comes with upper collar attached, as in photo, for advertised price. The like new, soft, pliable upper rubber seal to body pictured detached is sold separately for $20.00 extra. Please request a purchase invoice for seal and tube together if both are desired pn cast into tube is 17229-N4700 which has been superseded by pn -17208-N4700
Used 77-78 280Z coupe Fuel tank filler tube. Cleaned up, inspected and ready to install
Best quality, USED condition 240Z, 260Z, 280Z headlight bucket with only minor light surface rust on backside area
Nissan OEM (NLA) Fender Extension, LH, (used) Fits all 70-78 Da
Nissan OEM (NLA) Fender Extension, LH, (used) Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models) Best quality, used condition with only some minor light surface rust on backside area that will clean up easily prior to paint. All threaded studs and threads in undamaged condition. No dents or bondo. We also have lower priced, but quite decent and usable used condition variations of this part in stock. Call us direct to inquire about one of these to fit your budget. Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headligh
Best quality, USED condition 240Z, 260Z, 280Z headlight bucket with only minor light surface rust on backside area
Grade A, used LH, Front Bumper End for 77-78 280Z models
Grade A, used LH, Front Bumper End for 77-78 280Z models. Nis
Grade A, used LH, Front Bumper End for 77-78 280Z models. Nissan part number 62851-N4700 Part is in very good used condition for a part this old.
Grade A, used LH, Front Bumper End for 77-78 280Z models
(SOLD) excellent used condition Weber Dual DGV downdraft carburetor setup for L6 engine Z cars.
Weber/Redline Dual DGV Carburetor setups for L6 engines This sp
Weber/Redline Dual DGV Carburetor setups for L6 engines This specific DGV setup has sold. We have several more partially complete, 2 carb setups for sale at reduced prices. All setups have complete carburetor bodies and manifold adapters for Z car side mounting, but accessories like throttle rod and linkage arms may be missing. These misc pieces can still be purchased from Weber/Redline. If interested please call us direct with your project needs and we will check our stock to determine whether we can help or not. NOTE: Due to weight and size purchase of a DGV setup must be in
(SOLD) excellent used condition Weber Dual DGV downdraft carburetor setup for L6 engine Z cars.
Nice used condition, AT Shifter console cover for 1974 - 1978 260Z & 280Z models. Rare for an interior plastic part to have no scratches or scuff marks, but it does have one barely visible hair line crack (see close up photo with red circle) radiating out from one mounting screw hole, most of which would be covered up by the head of the screw after installation.
Nice used condition, AT Shifter console cover
This S30 Model Parts Interchange Manual is a reproduction of a 1970s era parts interchange reference publication for body & repair shops….
The S30 Model Parts Interchange Manual is a reproduction of a 1
The S30 Model Parts Interchange Manual is a reproduction of a 1970s era parts interchange reference publication for body & repair shops, that covers mostly the exterior & suspension/drivetrain sections of the 1970-1978 240Z, 260Z & 280Z models (Nissan model code :S30") that might need to be sourced to repair a damaged vehicle. However, some parts in the engine bay and interior are also covered in part, but not with total logic. All that said, these 8 pages of numbered illustrations and highly condensed information can be really invaluable for a Z car owner to have on his c
This S30 Model Parts Interchange Manual is a reproduction of a 1970s era parts interchange reference publication for body & repair shops….
optional console mounted antenna switch
Special factory optional console mounted antenna switch and fini
Special factory optional console mounted antenna switch and finisher plate unique to 1978 280Z models Switch encased in a metal housing as opposed to cheaper plastic housings used on most 280Z switches. One tang on underneath side of finisher plate is broken off, but test fits into a console opening confirm it will mount securely.
optional console mounted antenna switch
Used 14×6.5 Turbine style wheels for Datsun cars
Used 14x6.5 Turbine wheels Brand unknown, but many details poin
Used 14x6.5 Turbine wheels Brand unknown, but many details point to Kelsey-Hayes/ET brand that made virtually the exact same design wheel. All wheels in excellent used condition. Wheels have been partially cleaned up with acid cleaner. ** Price shown is for a single wheel. For a quote and shipping cost email us your name, ship to address & phone # plus number of wheels you wish to purchase and we will email back a total cost quote.
Used 14×6.5 Turbine style wheels for Datsun cars
Side skirt kit for 70-78 Datsun – Nissan Z cars
New, never installed, fiberglass side skirt set. Fits 70-78 Dats
New, never installed, fiberglass side skirt set. Fits 70-78 Datsun - Nissan 240Z, 260Z & 280Z (S30) coupes Exact same fiberglass side skirt kit that Motorsport Auto lists online as Code: 50-1461 priced at $189.99 MSA description reads: "Finish off your ground effects look with these fiberglass side skirts. Includes one left and one right side"
Side skirt kit for 70-78 Datsun – Nissan Z cars
Rear Skirt for 70-78 S30 Z cars
Brand new, never installed, classic style fiberglass rear skirt.