1972

Refurbished Nissan OEM Aluminum Rear Brake Drum for 240Z-260Z-280Z models, pn 43206-E4100 Professionally bead blasted clean and freshly turned, refurbished Nissan OEM aluminum Z car brake drums are now available from ZPARTS.COM.  Drums selected for refurbishing will have potential to be turned 2-3 times more in their lifetime and be in the best cosmetic condition we can find.  These drums are real Nissan OEM Z drums with superior quality factory casting technology and restoration correct cast-in symbols and text, unlike aftermarket repos. Desired for daily drivers and by r

New, NOS  240Z driver side motor mount bracket  11231-E4100 Note: we usually have these in used condition at lower price.  Contact us direct for a quote.

New, NOS Datsun Rear Brake Drum for 240Z-260Z-280Z models, 43206-E4100 Drum weighs 6.6 lbs Possibly the last one on the planet!  This a much sought after, real NOS Nissan factory brake drum, not one of the aftermarket repos that have recently appeared online.  Drum is in as clean and fresh of condition imaginable with original factory rust protection coating still looking like new. This last NOS drum in our inventory was part of a large purchase of NOS parts from an autocross enthusiast, who purchased large quantities of Nissan factory brake drums for his racing hobby back in t

New OEM 240Z fan belt, 11720-E8700 Nissan NOS OEM Fan Belt, pn 11710-E8700 replaced by 11920 M6600 This belt, in Nissan OEM pkg is labeled "Bando 11720-E8700  JAPAN" To insure a no hassle purchase online please compare measurements of this belt with one you intend to replace. V-Belt Width: 13 mm Length: 800 mm Belts: V type

New Nissan NOS OEM 240Z antenna switch, pn  27357-E8700 Replaces: pns  99993-00180, 27357-E4600 This switch appears to be same as Nissan used on 1972 Z and other Datsun models on through at least 1976 280Z. To insure a match, compare connector shape and pin out with one you which to replace before you purchase this one. NOTE: Most likely we have this switch in used condition at a lower price.  Contact us direct via email or phone and we'll check our stock for one. Below is a chart showing earlier part numbers that this unit appears to replace. part # model applie

Used Nissan OEM 14x6 wheel set, pn 40303-N3200 Front faces been acid cleaned.  Photos show typical used condition of 3 sets of these wheels in inventory.  When time allows, photos of a specific set can be taken and emailed to a serious buyer. Price for this SET: $995.00 plus shipping NOTE: Due to size and weight of this item our shopping cart can not calculate a total with shipping charge included. Historical Note: This wheel (pn 40303-N3200) is the only OEM wheel that Nissan specifically produced for the 70-78 240Z-260Z-280Z (S30) models world wide.  Nissan parts catalog shows

Refurbished Set of 4 ARE Vector wheels All wheels have been professionally bead blasted clean front and back ready for clear coating or custom paint per buyer's preference. Please call or email us direct for full details on this set Bolt pattern 4x4.5" 0 offset. PRICE: $550.00 (without center caps) NOTE: Sales of wheels must be custom processed to insure accurate shipping cost added to total.  To purchase, please send us your full name, ship to address, email address and phone #.  We will email orcall you within 2 business days with a shipping quote.

Excellent, used condition, original "Elephant" JDM valve cover oil cap for 72-73 240Z models. Photo shows actual cap for sale. Note: We also have several more of these caps in stock for sale priced somewhat lower dependent on degree of aged, used condition.  If interested please call us direct for a quote.

Used 240Z vapor tank to breather hose joint If you are experiencing a lot of gas fumes in your 240Z after filling up your tank, this little connector joint could be at least one source of the fumes if it has developed cracks from age and road vibration. Replacing a crack tube with a non cracked one can stop fumes from at least coming from this are of your car.  See my ZP Blog Tech write-up Crack Vapor Tube Connector for more info. This small, nearly undetectable, nylon plastic tube joins an integrated plastic rubber opening coming out of upper filler tube to an aprox. 12" long rubber

Custom made brass bushing & pivot pin kit with nylon shifter end piece included. Fits shifter handles for 4 & 5 speed Nissan transmissions used on 72-83 Z cars.