Ranco NOS (H28-305) Manual Heater Control Valve fits: 8/73-8/75 260Z-74.5-76 260Z/280Z with manual heater system Unit is virtually the exact same valve as the OEM  valve (pn: 27116-N3600) and will bolt up and function exactly as original OEM unit.  In fact the Ranco unit is probably a bit more reliable due to one design change to rear plunger rod connector where it replaced OEM design with a stronger looking rod linkage. NOTE: we happen to have a clean set of  original OEM cloth wrapped water hoses in somewhat faded, but excellent used physical condition (see photo) that we can sell s

Ranco NOS (H28-305) Heater Control Valve for 74-8/75 260Z-74.5-76 260Z/280Z

Used 75-76 OEM 280Z Hazard Switch This switch sold in either working, non refurbished or refurbished condition. Note: A $45.00 30 day refundable core charge will be added to invoice for either condition purchased. Both conditions offered will test as "functioning OK", but refurbished units will feel smoother and will most likely give many more years of service than a refurbished switch. Click on "Choose Option" to select condition to purchase. part # model applied date qty interchange superceded from to newer former COMP-SWITCH HAZARD 25910-N3600

75-76 280Z Hazard Switch – In Used or Refurbished condition

Used Nissan OEM (NLA) Fender Extension, RH Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models) Best quality OEM,  used condition with only some minor light surface rust on backside area that will clean up easily prior to paint.  All threaded studs and threads in undamaged condition.  No dents or bondo. We also have lower priced, but quite decent and usable used condition variations of this part in stock.  Call us direct to inquire about one of these to fit your budget. Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headlig

Best quality,  USED condition 240Z, 260Z, 280Z RH headlamp case 63115-N4700

Used, Tested AC Vent Door Actuator for 8/73-78 Datsun 260Z - 280Z Vacuum operated Vent Door Actuator mounted on passenger side AC distribution box .  Controls flap that opens and closes AC  air distribution vent door. Original part number 27080-N3600 replaced by 27080-N3601.  Unit now NLA

Used (NLA) AC Vent Door Actuator for 8/73-78 Datsun 260Z – 280Z

Note: NOS, OEM assembly featured in this AD in the past has SOLD We still have many good condition, USED 17 tooth (black), (pn 32703-78101) pinion/carrier sleeve assemblies in stock to sell.  If interested, send us a request for a quote via our Parts Inquiry form NOTE: The 17 tooth gear should be matched to a 3:54 ratio differential to cause speedo gauge to display correct speed. NOTE 2: See my blog post SPEEDO GEARS & SLEEVES ILLUSTRATED for more documentation on other colors & tooth count pinion gears in our inventory

USED 17 tooth (black), (pn 32703-78101) pinion/carrier sleeve assembly

Above average Used condition, Datsun/Nissan L6 engine timing cover, 13501-A8600 NOTE:  "Above average used condition" covers will have minimum water pump passage cavitation and no scratches on seal or gasket surfaces of any concern to an engine builder.  Bead blasted, cleaned up covers are not always ready to ship.  Usually we can get one ready to ship within a few days to a week if a prospective buyer alerts us to his/her needs a bit in advance.  Please call before placing an order. Fits all 70-83 L24, L26, L28 engines used original to 240Z, 260Z, 280Z and 280ZX models.  Also ot

Above average Used condition, Datsun/Nissan L6 engine timing cover, 13501-A8600

Used, bead blasted 14x7 ARE "trapezoid" slot wheel design Price for single wheel: Blasted $150.00; non blasted $125.  Quote for all 3 wheels upon request. Please reference wheel AD# wfs-111 Due to dimensions and weight, purchase of wheels must be processed manually through our in-house invoicing system.  Please call or email us to purchase or request a quote with shipping cost included. History Note: This unique "trapezoid" slot wheel design with a 4x4.5" bolt circle, is quite rare to find based on my 30 years of parting out early Z cars.  Apart from the trapezoid shaped slot d

Used, bead blasted 14×7 ARE “trapezoid” slot wheel design

Used warning buzzer for 72-73 240Z & 260Z models to 11/74 part # model applied date qty interchange superceded from to newer former ASSY-BUZZER WARNING 24814-68200 1 24814-E4600 1 Yes Yes 24814-68200 24814-E4601 7112 1 Yes Yes 24814-E4600 25450-E8800   7201 7307 1 No No 24814-E4601 26350-N3600 2 SEATER 2+2 SEAT ER 7308  7411 1 No No 25450-E8800

Used warning buzzer for 72-73 240Z & 260Z models to 11/74

Used 72*-78 S30 model Intermittent wiper amp assy pn 28820-N3300 (supersedes 28820-R1401) Part No. Model Applied Date Qty Ica Superceded From To N F 28820-R1401* 7207 7210 1   28820-N3300 2 SEATER 2+2 SEAT ER 7211 1 28820-R1401

Used 72*-78 S30 model Intermittent wiper amp assy

Used, not tested, Fuel Injection (EGI)  Relay for 75-77 280Z models. Nissan number on unit label is A13-000 001.  Nissan part number for all 280Z models, MT or AT, appears to be 22696-N4202 Fitment Note: Nissan parts lists for 280Z shows only one part number, but we have same unit in stock with slightly different numbers on label, A13-000 001 and  A13-000 002 (blue text).   When purchasing, we advise that you only order a used EGI unit with same label number as currently on your car. Due us not being able to test this unit we offer a limited exchange/return warranty on ones we

Used, rare Fuel Injection Relay for 75-77 280Z manual transmission models. Nissan part number A13-000 001