1987

NOS Crankshaft Pulley for VG30 engine Pulley is brand new, NOS OEM stock never installed, but has damage to the front gold colored, unbolt able front (3rd) pulley (shown in photos).  The most valuable part of this unit as a replacement for an aged, deteriorated pulley  is it's cast iron  section (black) with new condition, factory bonded in, anti vibration rubber layer. By simply swapping your used, bolted on front steel pulley onto this new, factory unit, you will have a complete solution to replacing your old, potentially damage prone pulley with a new one. NOTE: This pulley came in

Genuine Nissan NOS/OEM VG30E Valve Regrind Gasket Kit NLA pn= 11042-01p25  replaced by  A1042-01P9F** **Other Nissan part numbers for this kit appear to be: 11042-32F25, A1042-01P2F, A1042-02P2F, 11042-01P26AS, 11042-V5926AS, 11042-V5926, 11042-V6225, 11042-01P25, 11042-01P26, 11042-02P25, 11042-02P26 Hover your mouse or finger over touch screen to magnify list of gaskets included in this valve regrind gasket kit. For Nissan engines: VG30E. VG30E & VG30ET This kit applicable to following years & models: Make Model Year Body & Trim Engine & Transmissio

Genuine Nissan NOS/OEM VG30E Valve Regrind Gasket Kit NLA pn= 11042-02p25  replaced by  A1042-01P9F** **Other Nissan part numbers for this kit appear to be: 11042-32F25, A1042-01P2F, A1042-02P2F, 11042-01P26AS, 11042-V5926AS, 11042-V5926, 11042-V6225, 11042-01P25, 11042-01P26, 11042-02P25, 11042-02P26 Hover your mouse or finger over touch screen to magnify list of gaskets included in this valve regrind gasket kit. Part Fitment Model Year Trim Engine Important vehicle option details 200SX 1986-1988 SGL 6 Cyl 3.0L VG30E

Note: NOS, OEM assembly featured in this AD in the past has SOLD We still have many good condition, USED 17 tooth (black), (pn 32703-78101) pinion/carrier sleeve assemblies in stock to sell.  If interested, send us a request for a quote via our Parts Inquiry form NOTE: The 17 tooth gear should be matched to a 3:54 ratio differential to cause speedo gauge to display correct speed. NOTE 2: See my blog post SPEEDO GEARS & SLEEVES ILLUSTRATED for more documentation on other colors & tooth count pinion gears in our inventory

Used, like-new, 84-89 OEM 300ZX front LH/RH door stop, pn 80430-01P01

Used OEM, 84-87 300ZX gas cap pn 17251-01P00 Fits: 300ZX 1984-1987 GL, GLL, SF, SS 6 Cyl 3.0L VG30, VG30T Stanza 1986-1988 GL, SGL 4 Cyl 2.0L CA20E

Price: $455.00 for bare, stripped shell. Use our Parts Inquiry form to request purchase of shell pictured and/or any other related hdwe from this door. Used, bare Nissan OEM 300ZX (coupe) In excellent used condition.  Absolutely NO RUST or Dents. Shell sold stripped without any accessory hardware attached pn 80100·19P00  (replaced by H0100-19P00) Part Fits Model Year Trim Engine Important vehicle option details 300ZX 1985-1989 GL, GLL, SF, SS 6 Cyl 3.0L VG30, VG30T

Used, "300ZX" rear reflector bar/cover and license plate light, 26510-01P00 Also referred to as 300zx Center tail light section or rear center light.  Units in stock vary from clean with only minimum scratches to functional units with some internal stress cracks and minor external scratches and scrapes. Price: $65.-$85. depending upon degree of "used condition" you desire.  We offer wet sanding and mirror finish buff polishing of these units for an extra $25.00 charge in case you are searching for one of these decorative reflector bars to complete a new paint job or restoration.

Used main power window switch, driver side, 300ZX 25401-19P00 Part Fits Model Year Trim Engine Important vehicle option details 300ZX 1985-1988 GL, GLL 6 Cyl 3.0L VG30, VG30T

Used main power window switch, passenger side, 300ZX 25411 07P06 Part Fits Model Year Trim Engine Important vehicle option details 300ZX 1985-1988 GL, GLL 6 Cyl 3.0L VG30, VG30T