1977

Used OEM 280Z turn signal-dimmer switch Fits 77-78 (8/76-78) 280Z models OEM pn 25540-N4701 This is a non refurbish, used unit.  Has tested OK

77-78 280Z Hazard Switch Available in  Refurbished or Non-Refurbished conditions Note: A $45.00 refundable core charge will be added to invoice for either condition purchased. part # model applied date qty interchange superceded from to newer former COMP-SWITCH HAZARD 25910-N4700 8/76 78 1

Used Nissan OEM (NLA) Fender Extension, RH Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models) Best quality OEM,  used condition with only some minor light surface rust on backside area that will clean up easily prior to paint.  All threaded studs and threads in undamaged condition.  No dents or bondo. We also have lower priced, but quite decent and usable used condition variations of this part in stock.  Call us direct to inquire about one of these to fit your budget. Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headlig

Used, Tested AC Vent Door Actuator for 8/73-78 Datsun 260Z - 280Z Vacuum operated Vent Door Actuator mounted on passenger side AC distribution box .  Controls flap that opens and closes AC  air distribution vent door. Original part number 27080-N3600 replaced by 27080-N3601.  Unit now NLA

Note: NOS, OEM assembly featured in this AD in the past has SOLD We still have many good condition, USED 17 tooth (black), (pn 32703-78101) pinion/carrier sleeve assemblies in stock to sell.  If interested, send us a request for a quote via our Parts Inquiry form NOTE: The 17 tooth gear should be matched to a 3:54 ratio differential to cause speedo gauge to display correct speed. NOTE 2: See my blog post SPEEDO GEARS & SLEEVES ILLUSTRATED for more documentation on other colors & tooth count pinion gears in our inventory

Above average Used condition, Datsun/Nissan L6 engine timing cover, 13501-A8600 NOTE:  "Above average used condition" covers will have minimum water pump passage cavitation and no scratches on seal or gasket surfaces of any concern to an engine builder.  Bead blasted, cleaned up covers are not always ready to ship.  Usually we can get one ready to ship within a few days to a week if a prospective buyer alerts us to his/her needs a bit in advance.  Please call before placing an order. Fits all 70-83 L24, L26, L28 engines used original to 240Z, 260Z, 280Z and 280ZX models.  Also ot

Used, bead blasted 14x7 ARE "trapezoid" slot wheel design Price for single wheel: Blasted $150.00; non blasted $125.  Quote for all 3 wheels upon request. Please reference wheel AD# wfs-111 Due to dimensions and weight, purchase of wheels must be processed manually through our in-house invoicing system.  Please call or email us to purchase or request a quote with shipping cost included. History Note: This unique "trapezoid" slot wheel design with a 4x4.5" bolt circle, is quite rare to find based on my 30 years of parting out early Z cars.  Apart from the trapezoid shaped slot d

Used 77-78, 79-83 Nissan OEM 280Zm ZX fuel pressure regulator, pn 22670-N4700 Part Fitment Model Year Trim Important vehicle option details 280Z 280ZX 77-78 07/1978--1983 coupe & 2+2 GL, NON GL L28 L28E Datsun 810 1980-1984 DX, SL L24E - 6 Cyl 2.4L There are aftermarket replacements in the market, but none have the same design nor proper OEM factory mounting tabs that allow them to be installed securely and in proper location on a nicely restored or daily driver car. These OEM units are very sca

Used warning buzzer for 72-73 240Z & 260Z models to 11/74 part # model applied date qty interchange superceded from to newer former ASSY-BUZZER WARNING 24814-68200 1 24814-E4600 1 Yes Yes 24814-68200 24814-E4601 7112 1 Yes Yes 24814-E4600 25450-E8800   7201 7307 1 No No 24814-E4601 26350-N3600 2 SEATER 2+2 SEAT ER 7308  7411 1 No No 25450-E8800

Used 72*-78 S30 model Intermittent wiper amp assy pn 28820-N3300 (supersedes 28820-R1401) Part No. Model Applied Date Qty Ica Superceded From To N F 28820-R1401* 7207 7210 1   28820-N3300 2 SEATER 2+2 SEAT ER 7211 1 28820-R1401