Used black console finisher for 280ZX models that installs around base of manual transmission shift handle.
This black finisher is in rare to find, excellent used condition with no cracks and virtually no visible signs of wear.
NISSAN pn 96936-P9100
Production Date: 09/1981-
Fitting Vehicle Options: C. L28E. MT. F4 + C. L28E. MT. F5 + T/R. L28E. MT. F5 + T/R. L28ET. MT. F5
Interior Color: G,T
Note: we usually have more of these finishers in usable condition in different colors, but most show more visible signs of age. No matter the color, a decent condition finisher can
Used Nissan OEM (C2385) Fan Controller - amplifier for 280ZX
Alternate terms that refer to this unit are AC Heater Blower Fan Resistor Amplifier
Fits early year (79-80?) 280ZX models. This unit removed from a 6/80 production date 2+2 model.
Nissan part number and Production date range still being researched.
NOS OEM LH inner door sill trim for 240Z
Rare, NOS 240Z interior cosmetic piece perfect for a top quality 240Z restoration. pn 74931-E4100 (black)
We may also have 1 right side of this inner sill trim in stock. Search for pn 74930-E4100
TRIM-SILL INNER LH B
NOS OEM RH inner door sill trim for 240Z
Rare, NOS 240Z interior cosmetic piece perfect for a top quality 240Z restoration. pn 74930-E4100 (black)
We may also have 1-2 matching left side of this inner sill trim in stock. Search for pn 74931-E4100
TRIM-SILL INNER RH B
Ranco NOS (H28-305) Manual Heater Control Valve
fits: 8/73-8/75 260Z-74.5-76 260Z/280Z with manual heater system
Unit is virtually the exact same valve as the OEM valve (pn: 27116-N3600) and will bolt up and function exactly as original OEM unit. In fact the Ranco unit is probably a bit more reliable due to one design change to rear plunger rod connector where it replaced OEM design with a stronger looking rod linkage.
NOTE: we happen to have a clean set of original OEM cloth wrapped water hoses in somewhat faded, but excellent used physical condition (see photo) that we can sell s
Ranco NOS (H28-305) Heater Control Valve for 74-8/75 260Z-74.5-76 260Z/280Z
NOS Crankshaft Pulley for VG30 engine
Pulley is brand new, NOS OEM stock never installed, but has damage to the front gold colored, unbolt able front (3rd) pulley (shown in photos). The most valuable part of this unit as a replacement for an aged, deteriorated pulley is it's cast iron section (black) with new condition, factory bonded in, anti vibration rubber layer. By simply swapping your used, bolted on front steel pulley onto this new, factory unit, you will have a complete solution to replacing your old, potentially damage prone pulley with a new one.
NOTE: This pulley came in
Used Ignition control unit (ICU), pn 22020-H7281 (E12-27)
Unit has been tested in a running 280Z.
Note: A refundable $95.00 core charge will be added to invoice for this unit. More info
Fits 8/77 thru 78 Datsun 280Z models. Also fits many other popular 77 & 78 Datsun models listed below:
200 SERIES 78
Unt has been tested in a running 280Z
Excellent used condition Dash/instrument wiring harness
Pulled from a very clean, well maintained 1984 50th AE (Anniversary Ed.) 300ZX model.
Fits 07/83-08/84 production dates of 300ZX GLL 5 speed model with digital gauges. pn 24013-01P10
Important vehicle options
6 Cyl 3.0L