Used fuse cover for a 2/75 280Z 2+2 AT model. Functional replacement cover. No cracks or overheated areas, but there is some visible scuffing on plastic surface.
This cover most likely will be correct for 1976 AT 280Z models, but has not been verified as correct for 77-78 280Z models.
Note: Because AT vs MT models and individual years of 280Z models often had changes in their wiring harnesses, it is the responsibility of a purchaser, if no original fuse cover is in hand, to compare labels on this fuse cover with the layout of the fuse block on intended car to insure that this cover
Used, best condition 260Z/280Z RH door armrest
Note: Used chrome finisher priced per age condition & sold separately. Please contact us before purchasing an arm rest if you will need a finisher added to your order.
Note 2: LH armrests are also available. Search for "armrest" on this site.
Early pn 80940-N4600 later replaced with 80940-N4601
Used inner door armrest, RH 260Z/280Z pn 80940-N4600
New, Nissan OEM window regulator handle, pn 80760-A0600.
This is the "Real Deal", not a fake looking reproduction as is now sold all over the internet. Handle has the beautiful silver finish ring inset on knob and comes complete with original black plastic door panel protector and securing cadmium plated clip.
Correct OEM handle for all 70-78 240Z, 260Z, 280Z and 510 models
This is a REAL OEM handle in an original Nissan box. It is NOT a reproduction.
NOTE: If you are on a budget we also have many used window regulator crank handles for sale for $10.50 each. Please email o
Used (NLA) Vent Door Actuator for 8/73-8/74 ? * Datsun 260Z
Note: This part may also be correct up to 1978 280Z, but have not confirmed this yet.
Vacuum operated Vent Door Actuator mounted on driver side of Heater core box . Controls door flap that opens and closes air vent door near gas pedal.
Original part number 27081-N3100 replaced by 27081-N3600. Unit now NLA
Used (NLA) Vent Door Actuator for 8/73-8/74(?) Datsun 260Z
Used OEM Floor console
Fits all 74-76 Datsun 260Z /280Z coupes and 2+2 models Factory console comes with slit opening to accomdate a choke lever if desired or can be filled with a variety of cut to size plastic or vinyl covers. Overall console is in very good shape, but does have some slightly faded areas and a small break between choke lever slit and ashtray opening. Also, has 2 1/4" drill holes at rear to mount a hinged aftermarket arm rest. Console sold bare without ashtray, arm rest or misc, hdwe. $27.50 estimated shipping cost
USED, OEM Floor console Fits all Datsun 74-76 260Z /280Z coupes and 2+2 models
Nardi Wood Steering Wheel
One of the most recognizable and coveted Nardi Classic Wood Steering Wheels ever made. This wheel's stamped in serial number is 01779
Ferrari often chose this wheel to outfit many of it's classic models of the 60s & 70s. Wheel comes with Nardi logo center emblem and ringed collar.
NOTE: Wheel is in near flawless used condition with one caveat, in 2 locations along outer area of wheel, the original varnish like coating over top the thin, bright metal visible between the rear and front wooden sections, as opposed to wood areas, has loosened and fallen off.
Water heater hose for Datsun 280Z
Excellent used condition water heater hose for 75-78 Datsun 280Z models. No cracks in end rubber indicates that this hose was virtually new with very little in service tine before being removed from wrecked car. Good deal if you've been looking for this critical NLA part for long. Superseded Nissan pn: B7182-N4220
Excellent used condition water heater hose for 75-78 Datsun 280Z models.
Nice used condition, AT Shifter console cover for 1974 - 1978 260Z & 280Z models. Rare for an interior plastic part to have no scratches or scuff marks, but it does have one barely visible hair line crack (see close up photo with red circle) radiating out from one mounting screw hole, most of which would be covered up by the head of the screw after installation.
New aftermarket Speaker Enclosure Kit for 74.5-76 260Z/280Z . Comes in coupe and 2+2 model versions. Allows addition of 2 extra 4" speakers to rear area of a Z car without drilling or altering original interior panel, to add depth of sound and volume in a Z car where there are few options to adding speakers without loss of space or damage to valuable original interior parts.
Made of hard black plastic similar to Nissan OEM interior panel surfaces. Enclosure flanges have pre drilled holes that align to holes where stock inspection plates fasten to stock interior tail light panel of