280ZX rear hatch wiper motor

Used 280ZX Rear Hatch wiper motor Externally cleaned and tested.  Unit runs smooth and quiet. Comes with used mounting hardware and rubber bushings for spindle to hatch and wiper arm minus 3 mount tab screws.  See AD photo Part Fitment Part Number Model Year Trim Engine Important vehicle option details 28710-P7100 280ZX 1979-1983 GL, NON GL 6 Cyl 2.8L L28E, L28ET pn on label of unit reads "28710-P7130"

Used 79-83 280ZX Rear Hatch wiper motor, pn 28710-P7100

Datsun S30 fender extension 63115-N4700

Used Nissan OEM (NLA) Fender Extension, RH Fits all 70-78 Datsun 240Z, 260Z, 280Z (all S30 models) Best quality OEM,  used condition with only some minor light surface rust on backside area that will clean up easily prior to paint.  All threaded studs and threads in undamaged condition.  No dents or bondo. We also have lower priced, but quite decent and usable used condition variations of this part in stock.  Call us direct to inquire about one of these to fit your budget. Popular or alternate names for this part are Fender Extension, headlight bucket, headlight cone, headlig

Best quality,  USED condition 240Z, 260Z, 280Z RH headlamp case 63115-N4700

280ZX vent door actuator

280ZX Actuator-Vacuum ByPass door Used Vent Door Actuator for 79-83 280ZX (GL, NON GL) models (pn 27084-P7100) part now NLA Vacuum operated Vent Door Actuator mounted on driver side of Heater core box .  Controls door flap that opens and closes air vent door near gas pedal. Accessories in photo are included.  Unit tested OK

Used (NLA) Vent Door Actuator for 79-83 280ZX (GL, NON GL) models (pn 27084-P7100)


Used, Tested AC Vent Door Actuator for 8/73-78 Datsun 260Z - 280Z Vacuum operated Vent Door Actuator mounted on passenger side AC distribution box .  Controls flap that opens and closes AC  air distribution vent door. Original part number 27080-N3600 replaced by 27080-N3601.  Unit now NLA

Used (NLA) AC Vent Door Actuator for 8/73-78 Datsun 260Z – 280Z

speedometer pinion gear assy

NOS, OEM 17 tooth (black), speedometer pinion gear assembly, pn 32703-78101 (includes NOS carrier) Original factory packaging has been lost so will be mailed with out that, but it is a brand new, never used, assembly. NOTE: This part came stock on virtually all 1970-1989 S30, S130 and Z31 Z car models as well as 200SX and probably some other Datsun & Nissan models of the period.  The 17 tooth gear should be matched to a 3:54 ratio differential to cause speedo gauge to display correct speed. NOTE 2: See my blog post SPEEDO GEARS & SLEEVES ILLUSTRATED for more documentat

NOS, OEM 17 tooth (black), speedometer pinion gear assembly, pn 32703-78101 (includes NOS carrier)

240Z Series One center console

Used 70-71 240Z Series One bare center console without accessories We have 6-8 of these consoles in varying used condition, each priced individually.  Call us direct or use our Parts Inquiry form to define what condition will meet your needs and we will check stock and give you a quote. ASSY-FLOOR CONSOLE part# model from to 86700-E4155 MANUAL 7107 86700-E4750 AUTOMATIC 7107

Used 70-71 240Z Series One bare center console, pn 86700-E4155

240Z Horn Button Pad

Excellent used condition 1970-73 Datsun 240Z Horn Button Pad, 48410-E4600 This is one of our very best used condition Horn Buttons in stock.  Silver edging paint is in very nice condition for a part now 47 years old!  No abrasions or scuffs on front and no typical cracks on backside retainer collar section.  One small, easy to touch up, nick in black paint on on front side as is visible in photo. Note:  We also have many more of these hard to find horn buttons in inventory in varying used conditions at lower prices.  Contact us through our Parts Inquiry form or email to request a

Excellent condition  240Z Horn Button Pad, 48410-E4600

ARE "trapezoid" slot wheel design

Used, bead blasted 14x7 ARE "trapezoid" slot wheel design Price for single wheel: Blasted $150.00; non blasted $125.  Quote for all 3 wheels upon request. Please reference wheel AD# wfs-111 Due to dimensions and weight, purchase of wheels must be processed manually through our in-house invoicing system.  Please call or email us to purchase or request a quote with shipping cost included. History Note: This unique "trapezoid" slot wheel design with a 4x4.5" bolt circle, is quite rare to find based on my 30 years of parting out early Z cars.  Apart from the trapezoid shaped slot d

Used, bead blasted 14×7 ARE “trapezoid” slot wheel design